Page 1 of 1
restrictor
Posted: Sat Aug 13, 2005 10:25 pm
by spreefreak
if i remove the restrictor inside the muffler of my Iowa Spree would i have to chane the jets.
do any of you have step by step instructions to do so
Posted: Sun Aug 14, 2005 1:30 am
by Tippmann98
you should be fine. The iowa model is just highly restricted because of iowa's standards.. i have heard of people just ripping them out or replacing the muffler. you should be fine....
Posted: Sun Aug 14, 2005 10:02 am
by spreefreak
thank you any more suggestions
Posted: Mon Aug 15, 2005 6:19 pm
by Tippmann98
i would check the exhaughst port while you have the muffler off. i dont know if that restrictor would do anything or not. But my friends spree sure does get nasty even without one.
Posted: Mon Aug 15, 2005 8:52 pm
by vette76
i would think it would pack with carbon easier because it is only like a 1/4" hole compared to the 1" on non-iowa models.
Posted: Mon Aug 15, 2005 10:39 pm
by spreefreak
great, and tippmann98 what do you mean by "nasty"?
Posted: Tue Aug 16, 2005 2:20 am
by vette76
he meant carbon. thats what i was talking about.
Posted: Tue Aug 16, 2005 7:08 pm
by spreefreak
now i understand