Page 1 of 1
Quietist pipe?
Posted: Wed Apr 15, 2009 1:34 pm
by qaz
In the town I live in the police will write you up for an expansion chamber on your moped. If you ride a moped, you do not have to have a tag on it and supposedly an expansion chamber brings the power level up to the point that you must have a tag on it. Go figure?
What is the quietist pipe I could put on a 1999 Honda sa50 and still get a usable amount of power and not draw unwanted attention?
Posted: Wed Apr 15, 2009 1:42 pm
by burnt_toast
R1 would be good choice, should be close to stock sounding
Also YMS should be similar
Posted: Wed Apr 15, 2009 1:45 pm
by scooterwerx
i dont know if Leo Vince makes the sp3 pipe for the sa50, but on my aero it is almost as quiet as stock. the air filter is still louder.
Posted: Wed Apr 15, 2009 3:48 pm
by Wheelman-111
Greetings:
I'll second Werx on that. Noise is all from the Left side. You'll think you're riding a Puch.
Posted: Wed Apr 15, 2009 10:20 pm
by maddog
the stock pipe can be used for up to 72cc an open pod filter makes the noise.
Posted: Thu Apr 16, 2009 2:20 pm
by jesse1234
R1 is just as quiet as stock, if not quieter
Posted: Thu Apr 16, 2009 5:15 pm
by burnt_toast
yup there is sp3's for the sa50 too, forgot bout that one its quiet too
Posted: Thu Apr 16, 2009 6:33 pm
by Kenny_McCormic
Weld in a car muffler.
Posted: Thu Apr 16, 2009 7:46 pm
by toboggan
hahaha. you're not being serous.. right.
Posted: Thu Apr 16, 2009 9:14 pm
by Kenny_McCormic
toboggan wrote:hahaha. you're not being serous.. right.
Only half, nice sig.