Page 1 of 1
White walls
Posted: Tue Jun 23, 2009 11:57 am
by Fishman43
I just emailed the guy from this website about his White Wall tire paint.
http://www.mbzponton.org/valueadded/other/tirepaint.htm
Has anyone tried it on their scooter tires? If so I would like to hear opinions and ideas.
I also just ordered two new tires from Motorcyle Supperstore, I will try to remember to take pictures and post when I do the work.
Re: White walls
Posted: Tue Jun 23, 2009 2:12 pm
by GIJoeBob
Fishman43 wrote:I just emailed the guy from this website about his White Wall tire paint.
http://www.mbzponton.org/valueadded/other/tirepaint.htm
Has anyone tried it on their scooter tires? If so I would like to hear opinions and ideas.
I also just ordered two new tires from Motorcyle Supperstore, I will try to remember to take pictures and post when I do the work.
I am interested to hear how it goes. I would like to use this to get some whitewalls on my spree.
Re: White walls
Posted: Tue Jun 23, 2009 3:01 pm
by Fishman43
I will post when I get all the supplies. I just ordered new tires from Motorcycle Superstore, and ordered the tire paint (comes from the Netherlands

). The tires wont get here before July 3rd, I don't know when the paint will come. Hopefully at the same time, waiting isn't my strongest suit and it take 24 hours between each coat with a minimum of 3 coats recomended.
Re: White walls
Posted: Tue Jun 23, 2009 3:24 pm
by adark248
keep us updated, I'm looking for whitewalls, too. I saw some of that paint but didnt want to be the guinea pig
Re: White walls
Posted: Wed Jun 24, 2009 7:27 am
by Fishman43
I just recieved the following email:
Thank you for your order. The paint will be mailed tomorrow.
The normal delivery time to New Hampshire is around one week.
Before you paint the tires, please make sure to clean them well with a silicone remover, available in all shops selling auto paint.
The tires should be inflated with normal air pressure when painted.
It is good to warm the paint a little prior to painting, making it thinner and easier to handle.
To keep the whitewalls clean and free from discoloration, use Westley┬┤s Bleche-Wite:
http://www.amazon.com/s/ref=pd_rhf_s_1/ ... %20cleaner
Best regards,
Orn Sigurdsson
So I guess the paint should be here just before the tires. Good times, I will be spending the 4th of July weekend painting rubber

Re: White walls
Posted: Tue Jun 30, 2009 5:32 pm
by carp
Found some "old school" white wall inserts(for you young ins they are whitewalls that you put on between the tire and rim).On the web at Universal Vintage Tire.When this set of tires wear out,you can put them on the next set of tires.If they are like the old sets they are white all the way through.They are $6.50 each (need 2 per wheel) 10"-1 1/8".They have 8",14"(think I'll get a set for my Express),16",18' also.Look in the sale/clearance dept.Wow just think white wall Michelin S1s.Happy trails,Carp
Re: White walls
Posted: Tue Jun 30, 2009 10:01 pm
by GIJoeBob
carp wrote:Found some "old school" white wall inserts(for you young ins they are whitewalls that you put on between the tire and rim).On the web at Universal Vintage Tire.When this set of tires wear out,you can put them on the next set of tires.If they are like the old sets they are white all the way through.They are $6.50 each (need 2 per wheel) 10"-1 1/8".They have 8",14"(think I'll get a set for my Express),16",18' also.Look in the sale/clearance dept.Wow just think white wall Michelin S1s.Happy trails,Carp
So they wrap around the bead of the tire? Do they use any kind of adhesive?
Re: White walls
Posted: Tue Jun 30, 2009 10:17 pm
by carp
I really don't know on ether question.I've never used them,just remember them from catalogs from when I was a kid.I know they were popular back in the late 40's through 60's.I'll contact Universal tire with that question.I'll post their answers.Carp
Re: White walls
Posted: Wed Jul 01, 2009 12:17 am
by adark248
I saw some of those on a Chinese website but I couldn't read it. My Chinese is so rusty

They appeared to be just hard plastic that was held by pressure between rim and tire. I don't know if Carp is talking about the same thing, and they were way more expensive.
Please do keep us updated on this if you give them a call, because I would seriously consider that option.
Re: White walls
Posted: Wed Jul 01, 2009 8:25 am
by Fishman43
Those insert type white walls can be a little funky and cheap lloking. They tend to wrinkle away from the tire pretty quickly so you end up with wavy whitewalls. And once that happens as you drive down the road the wind will get behind them and actualy hold them away from the tire. That is why I am going with the paint, it is permanently attached to the tire, one can is supposed to do four car tires with two coats each so it should last a long time only using it on scoot tires making the cost really reasonable!
Re: White walls
Posted: Wed Jul 01, 2009 8:29 pm
by carp
I forgot about that.Probably why i remember seeing them(if they didn't look odd why would I have known that they weren't regular ww.You folks would have been real"happy"with me when those things started flapping like 'aunt Betty's"under arm flab at the last family picnic.May the wind i your face not be full of bugs,Carp
Re: White walls
Posted: Tue Jul 07, 2009 7:35 am
by Fishman43
The paint showed up in the mail yesterday, so for now at least I know that the company is legit and not just scamming money for nothing. They said it would be here last Friday, but considering it came by mail and Fri/Sat were USPS holidays they had the transit time right on. My wife and I have house guests this week, so it will be next before I get to the project. Updates to continue as I get them.
Re: White walls
Posted: Tue Jul 07, 2009 8:59 am
by GIJoeBob
Fishman43 wrote:The paint showed up in the mail yesterday, so for now at least I know that the company is legit and not just scamming money for nothing. They said it would be here last Friday, but considering it came by mail and Fri/Sat were USPS holidays they had the transit time right on. My wife and I have house guests this week, so it will be next before I get to the project. Updates to continue as I get them.
Thanks for the update.