Page 1 of 1
carb main bolts
Posted: Sat Dec 17, 2005 6:00 am
by edwardzx7
anyone know the size and lenth of the 2 main carb bolts that hold the carb on?not the ones that go on the pulley part,but the main part that just like floats there.4 carb bolts total.only need 2.
Posted: Sun Dec 18, 2005 11:06 am
by noiseguy
Couple of ways to do this (you must be working on an Elite, Spree have 2:)
1) Use a toothpick/paperclip/wire, run this down the hole and measure the length with the carb intake in place. Use a slightly shorter fastener for that hole.
2) Go to partsfish.com and look up the bolts there, if you select them it lists the length, in millimeters.
Have fun.
Posted: Mon Dec 26, 2005 2:43 pm
by edwardzx7
thanks but does not help any!
Posted: Tue Dec 27, 2005 12:52 am
by uspmale
Edd, If you can send a pic. with a reference scale, I'LL be able to help.
Or be more specific. on the part.
I have literally thousands of Spree parts from A to Z.
Thanks, Greg
uspmale@yahoo.com
Posted: Fri Dec 30, 2005 2:39 pm
by edwardzx7
,this should help,
Posted: Fri Dec 30, 2005 4:56 pm
by uspmale
It looks like you need 2 carb bolts,right?
I've got several dozen. E-mail me cause they're 2 different sizes.
uspmale@ yahoo.com
Posted: Mon Jan 02, 2006 7:22 pm
by lonelywanderer
if you need the two that bolt the carb to the manifold its 6x1.00 mm
Posted: Mon Jan 02, 2006 7:28 pm
by hrnytrtlsgsxr
lonelywanderer wrote:if you need the two that bolt the carb to the manifold its 6x1.00 mm
that sounds right
Posted: Mon Jan 02, 2006 7:34 pm
by lonelywanderer
hrnytrtlsgsxr wrote:lonelywanderer wrote:if you need the two that bolt the carb to the manifold its 6x1.00 mm
that sounds right
