Engine/piston work part 2
Posted: Tue Jul 06, 2010 11:14 am
Okay I have replaced the Piston and rings and now I have compression but it still will not fire. I have spark and gas so anyone have any ideas?
Honda Spree and Elite 50 Forums
Keeping Spree Elite Aero 50cc and Gyro Alive!
http://fastfoamfilter.com/hondaspree.net/phpBB3/
Engine/piston work part 2
http://fastfoamfilter.com/hondaspree.net/phpBB3/viewtopic.php?t=15297
Page 1 of 1
Re: Engine/piston work part 2
Posted: Tue Jul 06, 2010 12:16 pm
Loose ignition coil or wires?
Re: Engine/piston work part 2
Posted: Tue Jul 06, 2010 1:46 pm
I double checked those while putting back together. Will not start using ignition switch or kick start.
Re: Engine/piston work part 2
Posted: Tue Jul 06, 2010 6:34 pm
it will take 20-30 kicks to fill the case, hint put yur hand over the back of the carb while cranking.
Re: Engine/piston work part 2
Posted: Tue Jul 06, 2010 6:38 pm
Press brake lever
Turn kill switch to On position...
Turn kill switch to On position...
Re: Engine/piston work part 2
Posted: Tue Jul 06, 2010 9:20 pm
If he has spark it can't be that.bradthreee wrote:Press brake lever
Turn kill switch to On position...
Re: Engine/piston work part 2
Posted: Tue Jul 06, 2010 10:39 pm
HA ! 
HA !
HA !