Honda Spree and Elite 50 Forums

Posted: **Thu Jun 02, 2011 12:02 am**

I'm sure it's already somewhere on the forum, but what is the good screws settings on a 1984 honda spree carb?

Posted: **Thu Jun 02, 2011 12:17 am**

Try looking in the service manual in the "Owners and Service Manual" section of the forum.

Posted: **Thu Jun 02, 2011 9:54 am**

lamie2012 wrote:I'm sure it's already somewhere on the forum, but what is the good screws settings on a 1984 honda spree carb?

Ya..... I had to dig to find it too !

here's some 'quick click' links to help you out & save you some time

Wikispreedia located here:
http://hondaspree.net/wiki/index.php5?title=Main_Page

Technical Section:
http://hondaspree.net/wiki/index.php5?t ... al_Section

Carburetor Air/Fuel Adjustments - Spree:
http://hondaspree.net/wiki/index.php5?t ... ts_-_Spree

Carb adjustment screws pic here: (won't display pic in the standard [ img].jpg[ /img] format for some reason)
http://hondaspree.net/wiki/images/1/15/ ... Screws.jpg

Screw in air screw until it lightly seats then turn it
'84-'85 1 7/8th turns out
'86 1 1/2 turns out
'87 1 3/8ths turns out

Reset the idle speed with the throttle stop screw
Turn the air screw in or out to find the highest idle speed
Reset the idle speed with the throttle stop screw. Idle spec is 1800 rpm.
Make sure that the engine does not miss or run erratically. If necessary repeat steps 2 through 4

Honda Spree and Elite 50 Forums

1984 spree carb setting

1984 spree carb setting

Re: 1984 spree carb setting

Re: 1984 spree carb setting