Honda Spree and Elite 50 Forums

Has anyone attempted a Stretch and Fat Tire Kit on Spree without having to swap out the original motor ??? If so I need Info PLEASE thanks, D.

A strech is as easy at relocating the shock mount and extending the motor mount. Graphite9 sels a kit if you don't want to do it your self. As for the fat tire I don't think there is much you can do with the spree motor as I think the spree has a different rear rim than the rest but I could be wrong. If I'm wrong a met rim would be a start or a kymco hub and some case and exhaust mods you could go bigger. But someone with more spree experience will have to confirm.

I really appreciate the help ill check it out thanks, D.

graphite9 wrote:There are no hubs or wider wheels that im aware of.

Are the spree rear axle splines different from af05/16 splines? I was pretty sure but want to be clear.

thanks for the help really appreciate all the help I can get still researching

Hi TF. the 94 and up elite shaft will not fit the spree wheel. and vice versa. hope this helps.

graphite9 wrote:

ped wrote:Hi TF. the 94 and up elite shaft will not fit the spree wheel. and vice versa. hope this helps.

whoa ped. This is way to G rated. Are you feeling ok?

TF, is looking for this look . But it's not going to happen with the spree wheel
Just joking topfueled.